Automatic Vacuum Film Applicator
The automatic vacuum film applicator is designed to prepare uniform, traceable and highly reproducible coating films. Manual coating often suffers from poor consistency and obvious operation deviation among different operators, which makes sample comparison difficult and test results unreliable, mainly because the shear rate and pressure applied on the coating tool cannot be kept stable. Equipped with a precision drive system, this machine works with wire rods and various coating bars to coat at a set constant speed. With test panels fixed flat on the platform, the shear rate and pressure remain constant during coating. It greatly improves the repeatability of coating samples and produces films with consistent appearance, physical and chemical properties. It is widely used for sample preparation of paints, inks, adhesives and thin films.
Description:
The automatic vacuum film applicator machine is used to prepare uniform and traceable coatings with good reproducibility. Due to the frequent inconsistency of manual coating, especially the significant differences in operation between different operators, it makes the comparison of samples difficult and even unreliable. Because the factors that affect the coating are the shear rate and the weight added to the construction tool.
This automatic vacuum film applicator machine uses a precisely controlled wire rod or various coating machines to prepare coatings at a selected speed. Due to the flat placement of the test panel on the glass plate, the shear rate and weight applied to the construction tool during coating remain unchanged, greatly improving the reproducibility of the coating and obtaining a coating with consistent and uniform physical, appearance, and chemical properties.
Characteristics:
1. Small size and light weight
2. The speed can range from 0 to 100mm/s (other speeds can be customized).
3. Coating size: Users can customize the size by pressing the pause button
4. Test speed can be set, with an adjustment range of 10-100mm/s
5. Vacuum adsorption is suitable for the vacuum suction requirements of different coating substrates.
6. The function of vacuum coating machine or glass coating machine can be achieved through vacuum plate or glass plate.
7. Different coating tools can be selected based on the name, viscosity, and thickness of the coating.
8. Suitable for wire rods, single-sided coating machines, double-sided coating machines, and four sided coating machines.
Technical Parameters:
Moving speed : 0-1.2m/min (infinitely variable speed)
Travel length (maximum) :300 * 400mm
Speed regulation accuracy: 1 mm/s
Test board size (maximum): 320 * 500mm
Test platform type: Vacuum board or glass board
Coating rod diameter : 10mm
Total length : 400mm (effective coating width 300mm)
Dimensions : 710 * 490 * 250mm
Compliant with ASTM D823 standard
Power supply :110~230V; 50/60Hz
Power consumption : <100W
Weight : 20Kg
Ordering information：
NT 319 (touch screen glass panel)/
NT 318 (touch screen vacuum panel)
Video resources are being prepared. Contact our team for operation support.
Documents are being prepared. Request the latest version from our team.
